Research/Experimental Use High Performance Type LC-860NEW

Features

The LC-860 series of high-functionality zirconia oxygen analyzers was designed based on Toray Engineering's long track record with oxygen analyzers, and enables measurement ranging from ultra-low concentrations to 100% oxygen concentration with a single device.
This series is equipped with our unique zirconia sensor to enable stable and highly accurate measurement over the long term. It can be used in virtually any application, from research to built-in operation in online equipment. Easy to operate by functional key.

Main Specifications

Type Portable or panel-mounted
Display system O2 conc.; LED Digital, 6 Digitsl
Measurement range 0.1ppm~100vol%O2
(Oxygen Concentration (less than 1ppm) and 0-1ppm or less is out of warranty.)
Response speed In 30 sec. after changing sampling gas from Inlet. (90% response)
Repeatability Within ±1 % of full scale (Not guaranteed for 1ppm and the 0-1 ppm display range or below)
Sampling system Continuos Suction
Sample gas rate 200±50 ml/min
Sample gas conditions Flow Rate; 1000~2000 ml/min
Pressure; 0.03MPa or less
Humidity; Dew point shall be lower than ambient temperature.
No Flammable Gas, No Halogen Gas, Silica, Corrosive Gas nor Vapor shall be contained.
Recorder output Output signal: DC 0-10 V, insulation/load resistance 500 Ω max.
Communication Conformed to RS-232C
Alarm output Device Error Output
Concentration Error
Self Diagnosis Warm-up Error, CPU Error,Instruments Over Heat Error,and other 11type
Automatic refresh function Apply current to sensor automatically in detecting the deterioration of sensor during air calibration
Ambient temperature 0-40 °C
Warmup time In 20 min.
Dimensions 288(W) × 144(H) × 400(D)mm (Excluding protrusion)
Weight Approx. 10 kg
Gas connection INLET (Sample Gas); Rc 1/8
BYPASS OUT ; Rc 1/8
OUTLET (Sample Gas); Rc 1/4
Power Source Voltage; AC 100V±10 V Frequency; 50/60 Hz

Specifications are subject to change due to product improvements.

Dimensions

Front

Rear

Side

Research/Experimental Use High Performance Type LC-860
Oxygen Analyzers
High/Medium Concentration Measurement Type LC-750H
Clean Gas Sampling Equipment Built-in Type LC-750H/PC-110
Dirty Gas Sampling Equipment Built-in Type LC-750H/PC-111
Medium/Low Concentration Measurement Type LC-750L
Clean Gas Sampling Equipment Built-in Type LC-750L/PC-120
Research/Experimental Use High Performance Type LC-850K, KS, KD
Research/Experimental Use High Performance Type LC-860
General-Purpose Type LC-300
Low Concentration Measurement General-Purpose Type LC-450D
Low Concentration Measurement General-Purpose Type LC-450A
Baking and N2 Reflow Use Analyzer RF-30
Baking and N2 Reflow Use RF-400
Separate Sensor Type vacuum deposition SW/LD-300
SD/LD-450
Oxygen Analyzer for Food Packaging LC-450F
Gas Flush Packaging Sampling Inspection Type LC-750F
Oxygen Analyzer for Built-in Packing Machine LF-200
Combustion Management Application Type SE-740/SE-740D
Relevant web pages
Principle of Measurement of Zirconia Oxygen Analyzers
Inquiry
Please use this form to request information or make an inquiry regarding Research/Experimental Use High Performance Type LC-860.
To an inquiry form
TOP > Measurement & Control Technologies > Oxygen Analyzers